22
Remove the ‘heater back panel’ from the main heater unit.
Hold it up against your reference mark you made with
your pencil. Attach it to the wall using 6x ‘4*40mm’ screws
(three on each side) to secure the panel in place. These
screws are provided with the sauna heater.
Place and hold the heater unit inside the heater fence,
centered evenly. To find the vertical height, align the
top edge of the back of the heater unit with the top of
the fence.
After unboxing the heater, attach the ‘heater back
panel’ to the ‘main heater unit’. Slide the back panel up
into the rear side of the heater. This will allow you to
get an idea of what height the back panel needs to be
secured on the wall of the sauna.
Slide the main heater unit into place over the heater
back panel, ensuring both grooves of the back panel
are locked into the heater tight.
Then secure the heater into the back heater panel with
1x ‘3*25mm’ screw (supplied with sauna heater).
46.
45.
44.
47.
Mark with a pencil where the ‘heater back panel’
naturally rests against the wall of the sauna.