4.
INSTALLATION INSTRUCTIONS
The door lock is a simple slot, connect and screw
system. Slot the handle piece through the pre-drilled
hole and connect the locking bar. Secure the lock bar to
the handle with 2x ‘3*25mm’ screws.
Install both magnetic lock pieces onto the door using
2x’3*14mm screws.
Slot the two nodes of the door handle through the
glass holes provided, use 2x’6*75mm screws to fix the
handles together while squeezing both sides of the
handles tight.
Place the door’s hinges into the two grooves in the door
frame, and drill 3x ‘4*30mm’ flat head screws into each
hinge securing the door into place.
You may need a block of something soft under the
glass door to ensure it does not slip down.
Fix the additional ‘outside bench support beams’ with
2x‘4*40mm screws to sit adjacent to the pre-installed
support beam on the front wall. Repeat for the opposite
side of the sauna.
34.
33.
32.
35.
19
Connect an outdoor bench support leg to the outdoor
bench seat using the provided dowels.
Place the outdoor bench seat onto the supports.