20
Slot the indoor bench legs into the base of each indoor
bench seat using the provided dowels. Secure the legs to
the bottom of the barrel staves with 2x ‘4*40mm’ screws
per leg while ensuring the bench seats remains level.
Place the indoor bench seat inside, resting on the two
pre-installed bench supports connected to the front
and back panels.
Add an ‘inside bench seat support beam’ on the underside
of the bench seat in the centre with 2x ‘4*40mm’ screws.
Repeat for the other bench seat.
Secure the outdoor bench seat into the bench supports
using 4x ‘4*40mm’ screws. Screw down in between the
gaps so the screw is hidden.
Align the towel rack at your desired height, then use a
drill to secure the rack with 4x ‘3*30mm’ screws.
38.
37.
36.
39.
Next secure the outdoor bench leg using 2x ‘4*40mm’
screws while keeping the bench seat level.
Repeat for the other bench seat.
Secure with 4x ‘4*40mm’ screws
into the bench
supports, two screws on each end of the bench.