Alpine STi Series Gas Fireplaces
2
SAFETY INFORMATION
Safety Label...................................................3
Before Start....................................................4
General Safety Information ...........................4
System Specifications....................................5
SITE AND INSERT PREPARATION
Preparing Existing Fireplace .........................5
Preparing the Insert........................................6
Removing the Glass...........................6
Removing the
Appliance
Adapter.............................6
Preparing the Leveling Bolts .............6
Routing Gas Piping To the Fireplace ............6
Chimney Liners .............................................7
Installing Chimney Liners .............................8
Positioning the Insert.....................................9
INSTALLATION
Electrical Connections...................................9
Complete the Gas Connection .......................10
Log Installation..............................................10
TESTING AND ADJUSTMENT
Primary Air Adjustment ................................10
Pilot Light Adjustment ..................................11
Derating the Burner .......................................11
TRIM
Trim Panel Installation ...............................11
Fastening Face Pieces.....................11
Control Panel Access
Door
Installation.............................11
Remote Control (Optional).........................11
TABLE OF CONTENTS
OPERATION & MAINTENANCE
Operating Instructions ................................12
Fireplace Maintenance................................13
Replacing the Glass ....................................14
Log Replacement........................................14
Normal Operating Sounds ..........................15
Clearance Information ................................16
Instruction Plate..........................................17
Troubleshooting Guide...............................18
Replacement Parts List ...............................19
Exploded View ...........................................20
Warranty Information……………………..21
IMPORTANT:
SAVE THESE INSTRUCTIONS
The STi Series Direct Vent Fireplace must be installed
in accordance with these instructions. Carefully read all
the instructions in this manual first. Consult the
“authority having jurisdiction” to determine the need for
a permit prior to starting the installation. It is the
responsibility of the installer to ensure this fireplace is
installed in compliance with the manufacturer’s
instructions and all applicable codes.
This insert is intended to be installed by professional
installers that understand the principles of proper gas
installation techniques, venting principles, and safety
clearances. This manual is written with an assumption
that certain basic knowledge of this product exists with
the installer. The installation of this appliance should
not be attempted by anyone not familiar with these
basic principles.
