Alpine INE-W940E, Руководство пользователя

Страница: 32 / 176

32
-EN
01GB04INE-W940E.fm
ALPINE INE-W940E 68-25285Z52-A (EN)
Sound Setup Operation
1
Touch [Setup] icon of Top banner.
The Setup main screen is displayed.
2
Touch [Sound Menu] .
The Sound Menu screen appears.
3
Select the desired item.
Setting items: Car Specific Sound Setup / Media Xpander /
Factory's EQ / Balance/Fader/Sub.W / TCR (Time
Correction) / X-OVER / Parametric EQ / Other /
Defeat
4
Touch [ ] or [ ] etc., to change its setting.
• When the pop-up window for setup is displayed, touch [ ] to
close the window after setting.
5
Touch [ ] to return to the previous screen.
• Immediately after changing the Sound Setup (while the system is
writing data automatically) do not turn the ignition key to OFF.
Otherwise, the settings may not be changed.
Car Specific Sound Setup
[Car Specific Sound Setup] is selected in the Sound setup menu in step
3. Refer to “Sound Setup Operation” (page 32).
You can set and reproduce the best audio environment for the
environment in your car.
1
Touch the relevant Vehicle type.
2
Touch the position of the driver’s seat.
3
Touch the size of the front speaker.
4
Select whether or not there is a tweeter.
5
Select the installation position of the rear speaker.
If you select “No rear speaker,” you cannot adjust the rear
speaker in Fader/Time Correction/X-OVER in sound setup.
6
Select whether or not there is a subwoofer.
If you select “No,” you cannot adjust the subwoofer level/
subwoofer phase in sound setup.
7
Select the material of the car seats.
The settings confirmation screen is displayed.
• If the car seats are made of both leather and fabric, select [Half
leather]
.
8
Check the settings and touch [OK] .
• If Preset3 was already saved for Time Correction/X-OVER/
Parametric EQ, the data will be overwritten.
• The Car Specific Sound settings are reflected in the following Audio
Setup items.
Adjusting the Parametric Equalizer Curve (Parametric EQ)
Adjusting the Time Correction (TCR)
Adjusting the Crossover Settings (X-OVER)
• The Equalizer Presets (Factory’s EQ) settings are flat.
Sound Setup
The parking brake must be engaged to access the Setup screen.
Attempting to access this screen while driving will display the
warning-Unable to operate while driving.
The following steps 1 to 5 are common operations to each
“Setting item” of Sound Setup. Refer to each section for details.
01GB00INE-W940E.book Page 32 Monday, July 8, 2013 5:14 PM