Entering an address if house numbering is restarted
There are long roads where house numbering is restarted at
some point. This way the same house number can appear
twice or even more times on the same road. If this is the
case, after entering the house number, you need to select
the appropriate address by the district/suburb information.
Go to Main Menu Destination Address
1
By default, Alpine Navigation Software proposes the
country/state and settlement where you are. If needed,
tap the button with the name of the country/state,
and select a different one from the list.
2
If needed, change the settlement:
· To select the settlement from the list of recently used ones,
tap the button.
· To enter a new settlement:
1 Tap the button with the name of the settlement, or if
you have changed the country/state, tap
[City Name]
2 Start entering the settlement name on the keyboard.
3 Get to the list of search results:
· After entering a couple of characters, the names that match
the string appear in a list.
· Tap
[OK]
to open the list of results before it appears
automatically.
4. Select the settlement from the list.
3
Enter the street name:
1 Start entering the street name on the keyboard.
2 Get to the list of results:
· After entering a couple of characters, the names that
match the string appear in a list.
· Tap
[OK]
to open the list of results before it
appears automatically.
3 Select the street from the list.
4
Enter the house number:
1 Enter the house number on the keyboard.
2 Tap
[OK]
to finish entering the address.
5
A list appears with the matching addresses. Tap the
desired one.
6
The map appears with the selected point in the middle.
Tap
[Go]
. The route is then automatically calculated,
and you can start navigating.
Entering an address without knowing the district/suburb
Long roads can run across several districts or suburbs.
You may not know what particular house number is located
where. In this case, follow the instructions below:
Go to Main Menu Destination Address
1
By default, Alpine Navigation Software proposes the
country/state and settlement where you are. If needed,
tap the button with the name of the country/state,
and select a different one from the list.
2
If needed, change the settlement:
· To select the settlement from the list of recently used ones,
tap the button.
· To enter a new settlement:
1 Tap the button with the name of the settlement, or if you
have changed the country/state, tap .
2 Start entering the settlement name on the keyboard.
3 Get to the list of search results:
· After entering a couple of characters, the names that
match the string appear in a list.
· Tap
[OK]
to open the list of results before it
appears automatically.
4 Select the settlement from the list.
3
Enter the street name:
1 Start entering the street name on the keyboard.
2 Get to the list of results:
· After entering a couple of characters, the names that
match the string appear in a list.
· Tap
[OK]
to open the list of results before it
appears automatically.
3 Instead of selecting one of the streets,
tap
[Search in All]
4
Enter the house number:
1. Enter the house number on the keyboard.
2. Tap
[OK]
to finish entering the address.
5
A list appears with the matching addresses.
Tap the desired one.
6
The map appears with the selected point in the middle.
Tap
[Go].
The route is then automatically calculated,
and you can start navigating.
24
-EN