Alpine CDE-148EBT, Руководство по эксплуатации

Страница: 10 / 47

12
-EN
Playback
1
Press y (OPEN) .
The front panel will open.
2
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
Notes
• Close the front panel manually.
• When a disc is already inserted, press
V 
SOURCE to switch to the
Disc mode.
3
While playing back MP3/WMA/AAC, press 1

or

2 to
select the desired folder.
Pressing and holding 1

or

2 will change folders
continuously.
4
Press

or

to select the desired track (file).
Pressing and holding  or  will fast backward/fast
forward track continuously.
5
To pause playback, press  .
Pressing  again will resume playback.
6
After pressing y (OPEN) to open the front panel, press 
to eject the disc.
Notes
• Do not remove a CD during its eject cycle. Do not load more than one
disc at a time. A malfunction may result from doing either.
• Three-inch (8 cm) CDs cannot be used.
• Any file protected by DRM (Digital Rights Management) copy
protection, cannot be played back on this unit.
• The track display for MP3/WMA/AAC data playback is the file
numbers recorded on the disc.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
• Press VIEW to switch the display. For details, refer to “Displaying the
Text” on page 21.
Repeat Play
1
Press
z
4 .
The song is played back repeatedly.
RPT
*1

RPT

*2

(off )

RPT
*1
Only a track/file is repeatedly played back.
*2
Only files in a folder are repeatedly played back (MP3/WMA/
AAC mode only).
2
To cancel repeat play, select (off) with the above
procedure.
M.I.X. (Random Play)
1
Press 5 x .
The songs are played back in random sequence.
MIX

*1

MIX ALL
*2

(off )

MIX

*1
Only files in a folder are played back in random sequence (MP3/
WMA/AAC mode only).
*2
The tracks/files are played back in random sequence.
2
To cancel M.I.X. play, select (off) with the above procedure.
Searching for CD Text
On discs utilizing CD Text, songs can be searched and played by using
their recorded titles. For discs without CD Text, searches are made using
the track numbers associated with each song.
1
Press

ENTER during play.
This will set the search mode.
2
Turn the Rotary encoder to select the desired track, and
then press  ENTER .
This will play the selected track.
Notes
• Press
r
in the search mode to cancel. Or, the search mode is cancelled
if no operation is performed for 60 seconds.
• When CD Text Search is made during M.I.X. play, the M.I.X. play
mode will be cancelled.
• If any one of the preset buttons (1 through 6) is pressed in the
search mode, a search can be made quickly by skipping to the specified
location. For details, refer to “Direct Search Function” on page 37.
CD/MP3/WMA/AAC


SOURCE
/ENTER

VIEW

1
2

4
5
Rotary encoder
Preset buttons
(1 through 6)

00ALPINE.book Page 12 Friday, January 11, 2013 10:01 AM