![Alpine CDE-148EBT Скачать руководство пользователя страница 8](http://html.mh-extra.com/html/alpine/cde-148ebt/cde-148ebt_operating-instructions-manual_2907514008.webp)
10
-EN
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first time,
after changing the car battery, etc.
1
Turn off the unit power.
2
Press
y
(OPEN)
to open the front panel, and then remove
it.
3
Press
RESET
with a ballpoint pen or similar pointed object.
Adjusting Volume
Turn the
Rotary encoder
until the desired sound is
obtained.
Lowering Volume Quickly
Activating the Audio Mute function will instantly lower the volume level
by 20 dB.
1
Press
MUTE
to activate the MUTE mode.
The audio level will decrease by about 20 dB.
2
Pressing
MUTE
again will bring the audio back to its
previous level.
Setting the Time and Calendar
1
Press and hold
AUDIO/SETUP
for at least 2 seconds to
activate the SETUP selection mode.
2
Turn the
Rotary encoder
to select the General mode, and
then press
ENTER
.
Audio
General
Display
Tuner
iPod&USB
Application
Bluetooth
*
Audio
*
CDE-148EBT only.
3
Turn the
Rotary encoder
to select Clock Adjust, and then
press
ENTER
.
4
Turn the
Rotary encoder
to set year.
5
Press
ENTER
.
6
Repeat steps 4 and 5 above to set month, date, hour and
minute.
7
Press and hold
AUDIO/SETUP
for at least 2 seconds to
return to normal mode.
Notes
• Pressing
r
returns to the previous SETUP mode.
• If no operation is performed for 60 seconds, SETUP is cancelled.
• To synchronise the clock to another clock/watch or radio time
announcement, press and hold
ENTER
for at least 2 seconds after
setting the “hour”. Minutes will reset to 00. If the display shows over
“30” minutes when you do this, the time will advance one hour.
RESET switch
Controllable with Remote Control
This unit can be controlled with an optional Alpine remote control.
For details, consult your Alpine dealer. Point the optional remote
control transmitter at the remote-control sensor.
Connectable to Remote Control Interface Box
With an optional Alpine Steering Wheel Remote Control Interface
Box (not included), this unit is controllable from the vehicles
steering wheel controls. For details, contact your Alpine dealer.
Remote control sensor
00ALPINE.book Page 10 Friday, January 11, 2013 10:01 AM