background image

28

-EN

For example:

Searching by Artist name
The following example explains how an ARTIST search is performed. 
Another search mode can be used for the same operation, although the 
hierarchy differs.

1

Press 



ENTER

 to activate the search selection mode.

The “

” indicator lights up.

2

Turn the 

Rotary encoder

 to select the ARTIST search 

mode, and then press 



ENTER

.

PLAYLIST 

 ARTIST 

 ALBUM 

 SONG 

 PODCAST 

 GENRE 

 COMPOSER 

 AUDIOBOOK 

 PLAYLIST

3

Turn the 

Rotary encoder

 to select the desired Artist, and 

then press 



ENTER

.

4

Turn the 

Rotary encoder

 to select the desired Album, and 

then press 



ENTER

.

5

Turn the 

Rotary encoder

 to select the desired Song, and 

then press 



ENTER

.

Notes

• This function is unavailable when iPod is selected in “Setting the iPod 

Control” (refer to “Setting the iPod Control” on page 27).

• After pressing and holding 



ENTER

 for at least 2 seconds while in 

each hierarchy (except SONG and AUDIOBOOK hierarchy), all songs 
of the selected hierarchy are played back.

• After selecting [ALL] in the search mode with“

*

”, press and hold 



ENTER

 for at least 2 seconds to play back all songs in the iPod/

iPhone or selected search mode.

• While in the search mode, if you press and hold 

 for 2 seconds, or no 

operation is performed for 60 seconds, the search mode is cancelled.

• In the search mode, pressing 

 will return to the previous mode.

• When search is made during M.I.X. play, the M.I.X. play mode will be 

cancelled.

• “NO SONG” will be displayed if there are no songs in the selected 

playlist in the PLAYLIST search mode.

• “NO PODCAST” will be displayed if there is no podcast data in the 

iPod/iPhone in the PODCAST search mode.

• “NOAUDIOBOK” will be displayed if there is no audiobook data in the 

iPod/iPhone in AUDIOBOOK search mode.

• If “iPod name” stored in the iPod/iPhone is selected in the desired 

Playlist search mode, and 



ENTER

 is pressed, you can search for all 

songs in the iPod/iPhone. Also, if you press and hold 



ENTER

 for at 

least 2 seconds, all songs in the iPod/iPhone are played back.

• Depending on the iPod/iPhone, podcast search is not supported.
• If any one of the 

preset buttons (1 through 6)

 is pressed in the 

search mode, a search can be made quickly by skipping to the specified 
location. For details, refer to “Direct Search Function” on page 28.

Direct Search Function

The unit’s direct search function can be used to search for an album, 
song, etc., more efficiently. In PLAYLIST/ARTIST/ALBUM/SONG/
PODCAST/GENRE/COMPOSER/AUDIOBOOK mode, you can 
quickly target any song.

In the search mode, press any one of the 

preset buttons (1 

through 6)

 to quickly skip over a designated percent of 

your song content.

Song search example:

If there are 100 songs in your iPod/iPhone, they are divided into 6 
groups using percentages (shown below). These groups are 
assigned to the preset buttons (1 through 6).

Example 1:

Suppose the song you are searching for is located at around the 
middle (50%) of your library: press button 4 to jump to the 50th 
song and turn the 

Rotary encoder

 to find the desired song.

Example 2:

Suppose the song you are searching for is located near the end 
(83%) of your library: press button 6 to jump to the 83rd song 
and turn the 

Rotary encoder

 to find the desired song.

Select Playlist/Artist/Album/Genre/
Composer/Episode

Playlist/Artist/Album/Genre/Composer/Episode can be easily changed.
For example, if you listen to a song from a selected album, the album can 
be changed.

Press 

 or 

 to select the desired Playlist/Artist/Album/

Genre/Composer/Episode.

Notes

• If the song search mode was used to select a song, this function is 

inactive.

• If an album is selected during an artist search, other albums by that 

artist are searchable.

• This function is inactive during shuffle (M.I.X.) playback.

Alphabet Skip Function

The initial skip function is skipped to the next number, symbol or letter 
such as from A to B, B to C.
You can skip in reverse order such as B to A by pressing 

.

During search mode, press 

 or 

 to perform the 

Alphabet Skip Function.

A list is skipped to the next number, symbol or letter.

Audiobook

Hierarchy 1

Hierarchy 2

Hierarchy 3

Hierarchy 4

All 100 songs (100%)

0%

17%

33%

50%

67%

83%

Preset 

buttons

1

2

3

4

5

6

Songs

1st 

song

17th 

song

33rd 

song

50th 

song

67th 

song

83rd 

song

Содержание CDE-123R






































Отзывы: