16
-EN
Sound Setting
You can flexibly customize the unit to suit your own preference and
usage. From the AUDIO SETUP menu, Audio Setting can be modified.
1
Press and hold
AUDIO
SETUP
for at least 2 seconds to
activate the SETUP mode.
2
Turn the
Rotary encoder
to select AUDIO, and then press
ENTER
.
BLUETOOTH
*1
GENERAL
AUDIO
DISPLAY
TUNER
iPod & USB
*1
Displayed only when INT MUTE is set to OFF, and the mode is
set to other than BT AUDIO.
3
Turn the
Rotary encoder
to select the desired sound
setting menu, and then press
ENTER
.
FACTORY EQ
*2/*3
3BAND EQ
*2/*4
HPF
*2
SUBWOOFER
SUBW LPF
*5
SUBW PHASE
*5
SUBW SYS
*5
*2
Adjustment cannot be performed when DEFEAT is set to ON.
*3
The FACTORY EQ’s setting value and 3BAND EQ’s setting
value are linkage.
*4
The FACTORY EQ’s setting value and 3BAND EQ’s setting
value are linkage. In step 3, three sound adjustment items (Bass,
Mid and Treble) can be selected in 3BAND EQ mode, turn the
Rotary encoder
to select the desired item, and then press
ENTER
to continue to step 4.
*5
These functions are inoperable when Subwoofer is set to OFF.
4
Turn the
Rotary encoder
to change the setting, and then
press
ENTER
.
(e.g. Select SUBWOOFER ON or SUBWOOFER OFF)
5
Press and hold
AUDIO
SETUP
for at least 2 seconds to
return to normal mode.
Notes
• Pressing
returns to the previous Sound menu mode.
• If no operation is performed for 60 seconds, Sound menu mode is
cancelled.
10 typical equalizer settings are preset at the factory for a variety of
musical source material.
USER
FLAT
POPS
ROCK
NEWS
JAZZ
ELEC
DANCE
HIP HOP
EASY LIS
COUNTRY
CLASSICAL
You can modify the Equalizer settings to create a response curve more
appealing to your personal taste. The setting of Bass, Mid and Treble can
be adjusted in this mode.
Setting the Bass Control
1
After selecting BASS from the 3BAND EQ adjustment
mode, turn the
Rotary encoder
to select the desired Bass
setting item, and then press
ENTER
.
WIDTH (Q)
CENTER FRQ
LEVEL
2
Turn the
Rotary encoder
to select the desired setting
value, and then press
ENTER
.
3
Press
to return to the previous step.
Setting the Bass Bandwidth (WIDTH (Q))
Turn the
Rotary encoder
to select the desired bass
bandwidth.
WIDE 0.50
MEDIUM 1.00
MEDIUM 1.50
NARROW 2.00
Changes the boosted bass bandwidth to wide or narrow. A wider setting
will boost a wide range of frequencies above and below the centre
frequency. A narrower setting will boost only frequencies near the
centre frequency.
Setting the Bass Centre Frequency (CENTER FRQ)
Turn the
Rotary encoder
to select the desired bass centre
frequency.
60 (Hz)
80 (Hz) (Initial setting)
100 (Hz)
120 (Hz)
Emphasises the displayed bass frequency ranges.
Setting the Bass Level
Turn the
Rotary encoder
to select the desired bass level
(-7~+7)
*
.
You can emphasise or weaken the bass level.
*
The adjustment can also be made by pressing
AUDIO
. Refer to
“Adjusting Subwoofer Level/Bass Level/Mid Level/Treble Level/
Balance (Between Left and Right)/Fader (Between Front and
Rear)/AUX Mix Level/Loudness/Defeat” on page 15.
Setting the Mid Control
1
After selecting MID from the 3BAND EQ adjustment mode,
turn the
Rotary encoder
to select the desired Mediant
setting item, and then press
ENTER
.
WIDTH (Q)
CENTER FRQ
LEVEL
2
Turn the
Rotary encoder
to select the desired setting
value, and then press
ENTER
.
3
Press
to return to the previous step.
Setting the Mid Bandwidth (WIDTH (Q))
Turn the
Rotary encoder
to select the desired Mid
bandwidth.
WIDE 0.75
MEDIUM 1.00
MEDIUM 1.25
NARROW 1.50
Setting the Mid Centre Frequency (CENTER FRQ)
Turn the
Rotary encoder
to select the desired Mid centre
frequency.
500 (Hz)
1.0k (Hz) (Initial setting)
1.5k (Hz)
2.5k (Hz)
Setting the Mid Level
Turn the
Rotary encoder
to select the desired Mid level (-7
~ +7)
*
.
You can emphasise or weaken the Mid level.
*
The adjustment can also be made by pressing
AUDIO
. Refer to
“Adjusting Subwoofer Level/Bass Level/Mid Level/Treble Level/
Balance (Between Left and Right)/Fader (Between Front and
Rear)/AUX Mix Level/Loudness/Defeat” on page 15.
Use steps 1 to 5 to select one of the setting modes to modify.
See the applicable section below for details about the
selected setting item.
Equalizer Presets (FACTORY EQ)
Adjusting the Parametric Equalizer Curve
(3BAND EQ)
Содержание CDE-123R
Страница 2: ......
