24
-EN
Notes
• Change to a source other than the USB Memory mode, then remove the
USB Memory. If the USB Memory is removed in the USB Memory
mode, data may be damaged.
• When removing USB Memory, pull it out straight.
• If sound is not output or USB Memory is not recognized even when
USB Memory is connected, remove USB Memory once, and then
connection it again.
• Route the USB cable away from another cables, etc.
• After removing the USB Memory, close the cover of the USB Connection
Terminal to prevent dust or foreign objects from entering and causing a
malfunction.
• On how to connect an USB Memory to Rear USB Connector, refer to
“Rear USB Memory Connection (sold separately)” on page 35.
Using the USB Memory/Portable audio
player Banking Function
When a USB Memory is connected, the follows description is available
only when TAG is set in “Setting the USB Search Mode” (refer to
“Setting the USB Search Mode” on page 23).
What is a Bank?
A bank is a unit of up to 1,000 songs, which is stored in memory.
“BANKING” refers to the grouping of songs available in USB Memory, in
banks of 1,000 songs each. However, when a USB Memory is connected,
1BANK can store up to 1,000 songs under the following conditions.
Otherwise, the number of songs that can be stored may be less than
1,000.
Conditions (general estimate values)
Playlists: 20 (32 characters; 64 bytes)
Genres: 10 (32 characters; 64 bytes)
Composers: 30 (32 characters; 64 bytes)
Artists: 30 (32 characters; 64 bytes)
Albums: 100 (32 characters; 64 bytes)
Titles: 1,000 (32 characters; 64 bytes)
Folders: 100 (32 characters; 64 bytes)
Files: 1,000 (32 characters; 64 bytes)
File Paths: 1,000 (128 characters; 256 bytes)
About Banking
While a bank is being built up, “BANKING” is displayed. Banking occurs
whenever a USB Memory device/Portable audio player is connected or
after power to the head unit turns on.
It can take anywhere from a few seconds to up to several minutes for
banking to complete. This depends on the number of files and folders
in USB Memory/Portable audio player.
Available operations while Banking
• During Banking, the information display changes so the VIEW
operation is not available.
• With a song playing, Regular fast-forwarding and next song selection is
available.
• While Banking, the song playback order may differ from the song order
in the USB Memory device/Portable audio player.
• Searching is not recommended during the Banking process as the
database is under construction at this time, and malfunction may result
in some cases.
This unit has a BANK function that automatically divides every 1,000
songs stored in USB Memory/Portable audio player into individual
banks to make searching and playing back a song easier. A maximum of
1,000 songs for one bank can be stored according to the order stored in
USB Memory/Portable audio player. A maximum of 20 banks (20,000
songs) can be recognized.
Playback
1
Press
SOURCE
to select the USB mode.
Depending on which USB Connector you used, press
BAND/F/R
to switch USB source between FRONT and REAR.
2
Press
or
to select the desired track (file).
Pressing and holding
or
will fast backward/fast
forward track continuously.
Note
• Depending on the connected portable audio player, fast-forwarding/
fast-reversing may not be available.
3
To pause playback, press
.
Pressing
again will resume playback.
Notes
• WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from the
iTunes Store and files that are copy-protected (copyright protection)
cannot be played back on this unit.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
• If there is tag information, artist name/album name/track name is
displayed.
• If an MP3/WMA/AAC file contains ID3 tag/WMA tag information,
the ID3 tag/WMA tag information is displayed (e.g., song name, artist
name, and album name). All other tag data is ignored.
• “NO SUPPORT” is displayed when text information is not compatible
with this unit.
• Before disconnecting USB Memory, be sure to change to another source
or set to pause.
• Press
VIEW
to switch the display. For details, refer to “Displaying the
Text” on page 18.
Searching for a desired Song
You can select to search a song by Tag information or Explorer (FILE
NAME) mode. Before you search a song, select your desired search
mode in “Setting the USB Search Mode” (refer to “Setting the USB
Search Mode” on page 23).
Before performing the following procedures, make sure TAG is selected
in “Setting the USB Search Mode” (refer to “Setting the USB Search
Mode” on page 23).
A Flash Memory Device or Portable audio player can contain hundreds
of songs. By using file tag information and keeping these songs
organized in playlists, this unit’s search functions will ease song searches.
Each music category has its own individual hierarchy. Use the Bank
*1
/
Playlists
*2
/Artists/Albums/Songs/Genres/Composers/Folders/Files
search mode to narrow searches based on the table below.
Bank No.
Song number
Bank1
1~1,000
Bank2
1,001~2,000
Bank20
19,001~20,000
Searching by Tag information
Hierarchy
1
Hierarchy
2
Hierarchy
3
Hierarchy
4
Hierarchy
5
Bank
*1
Playlist
*2
Song
—
—
Bank
*1
Artist
*
Album
*
Song
—
Bank
*1
Album
*
Song
—
—
Bank
*1
Song
—
—
—
Bank
*1
Genre
*
Artist
*
Album
*
Song
Bank
*1
Composer
*
Album
*
Song
—
Bank
*1
Folder
File
—
—
Содержание CDE-123R
Страница 2: ......
