6
-EN
Adjusting Volume
Turn the
Rotary encoder
until the desired sound is
obtained.
Volume : 0 ~ 35
Lowering Volume Quickly
Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
Press
MUTE
to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Pressing
MUTE
again will bring the audio back to its
previous level.
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first
time, after installing the CD changer, after changing the car battery, etc.
1
Turn off the unit power.
2
Remove the detachable front panel.
3
Press
RESET
with a ball-point pen or similar
pointed object.
1
Setting Time
1
Press
DISP/TITLE
repeatedly until the time is
displayed.
For details, see "Displaying the Title/Text" (page 13).
2
Press and hold
DISP/TITLE
for at least 3
seconds while the time is displayed.
The time indication will blink.
3
Turn the
Rotary encoder
to adjust the hours.
4
When the hour has been adjusted, press the
Rotary encoder
.
5
Turn the
Rotary encoder
to adjust the minutes
while the time indication is blinking.
The time is automatically set 5 seconds after the minute
adjustment. The time can also be manually set by
pressing the Rotary encoder.
• To synchronize the clock to a time signal, press and hold the
Rotary encoder
for at least 3 seconds after setting the “hour.”
Minutes will be indicated as 00. If you press and hold the
Rotary
encoder
for more than 3 seconds when the display shows over
“30,” hours will advance.
RESET switch
