20
-EN
Retrieving an addressee by Selecting Search (A-Z search)
3
Press
8
or
9
to select an initial letter (A to Z) of the
addressee.
4
Turn the
Rotary encoder
to select the addressee.
5
Press
:
/
J
or
Rotary encoder
to place a call.
6
Press
BAND/TEL.
to end the call.
Telephone mode will end and return to the original source
mode.
• If all telephone numbers and registered names cannot be displayed
at once, press
DISP/TITLE
to show undisplayed numbers and
names.
• “NO MEM” is displayed if nothing is registered in the Phone
Book.
Calling by using the Speed Dial
You can place a call by retrieving one of the telephone numbers
registered in No. 1 to 9 of the address book.
1
Press and hold
BAND/TEL.
for at least 2 seconds.
2
Within 5 seconds, place a call by pressing and
holding the desired
preset buttons (1 through 6)
for at least 2 seconds.
By pressing
F/SETUP
, and then pressing a
preset
button (1 through 3)
for at least 2 seconds, you
can place a call to the number registered in 7 to 9.
• You can place a call by pressing
:
/
J
after momentarily pressing
the
preset button (1 through 6)
of the number you wish to call.
• You can place a call by pressing the
Rotary encoder
, after selecting
a number which you wish to call, by pressing
g
or
f
, or by
turning the
Rotary encoder
.
3
Press
BAND/TEL.
to end the call.
Telephone mode will end and return to the original source
mode.
• If there is no telephone number registered to a preset button, “NO
P-SET” is displayed when you try to place a call.
Calling by the outgoing/incoming/absent incoming history
You can place a call to any of the last 999 calls by the outgoing/
incoming/absent incoming history.
1
Press
SEARCH/QS
in PHONE BK (Phone Book)
mode to select the History mode.
2
Press
8
or
9
to select outgoing history (display
example: “DIALED”), incoming history (display
example: “RECEIVED” ), absent incoming history
(display example: “MISSED”).
3
Turn the
Rotary encoder
, or press
g
or
f
to
select the addressee from the outgoing or
incoming history.
4
Press
:
/
J
or the
Rotary encoder
to place a call.
5
Press
BAND/TEL.
to end the call.
Telephone mode will end and return to the original source
mode.
• If all telephone numbers and registered names cannot be displayed
at once, press
DISP/TITLE
to show undisplayed numbers and
names.
• “NO MEM” is displayed if there is no incoming history.
SMS (Short Message Service) Operation
You can be informed when you receive a short message.
Receiving a short message
1
When a text message is received, “NEW MSG” is
indicated on the display.
The contents of the received message can only be read
from the portable phone's display.
2
Press any one of the buttons on the unit to cancel
the display. The buttons that are pressed will enter
the mode or will be activated.
