27
-EN
To prevent noise/interference in the audio system.
•
Locate the unit and route the leads at least 10 cm away from the car harness.
•
Keep the battery power leads as far away from other leads as possible.
•
Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.
•
If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise
suppressors, contact them for further information.
•
Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
)
Left Front (+) Speaker Output Lead (White)
~
Ai-NET Connector
Connect this to the output or input connector of other
product (CD Changer, Equalizer, etc.) equipped with Ai-
NET.
• You can input TV/video sound by connecting an optional Ai-NET/
RCA Interface cable (KCA-121B) to this component.
+
XM Antenna Connector
Connect this to an optional XM antenna.
,
Front Output RCA Connectors
RED is right and WHITE is left.
-
Rear/Subwoofer Output RCA Connectors
RED is right and WHITE is left.
• When Subwoofer is set to OFF: Output is from Rear speakers.
When Subwoofer is set to ON: Output is from Subwoofer.
For details on how to set the Subwoofer to ON/OFF, see
"Subwoofer On and Off" on page 15.
.
System Switch
When connecting a processor or divider using Ai-NET, place
this switch in the EQ/DIV position. When no device is
connected, leave the switch in the NORM position.
• Be sure to turn the power off to the unit before changing the switch
position.
/
Ai-NET Cable (Included with CD Changer)
:
RCA Extension Cable (Sold Separately)
1
Antenna Receptacle
2
Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna,
if applicable.
• This lead should be used only for controlling the vehicle's power
antenna. Do not use this lead to turn on an amplifier or a signal
processor, etc.
3
Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
4
Audio Interrupt In Lead (Pink/Black)
5
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle's fuse
box or another unused power source which provides (+)12V
only when the ignition is turned on or in the accessory
position.
6
Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle's
battery.
7
Ground Lead (Black)
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
8
Fuse Holder (15A)
9
Power Supply Connector
!
Right Front (+) Speaker Output Lead (Gray)
"
Right Front (–) Speaker Output Lead (Gray/Black)
#
Right Rear (–) Speaker Output Lead (Violet/Black)
$
Right Rear (+) Speaker Output Lead (Violet)
%
Left Rear (+) Speaker Output Lead (Green)
&
Left Rear (–) Speaker Output Lead (Green/Black)
(
Left Front (–) Speaker Output Lead (White/Black)
