Alpine CDA-7998R, Руководство пользователя

Страница: 8 / 56

6
-EN
Turning Power On and Off
1
Press the POWER button to turn on the unit.
NOTE
The unit can be turned on by pressing any other button except
the eject
c button and Rotary encoder.
The volume level gradually increases to the previous
level you were listening to before the unit was turned
off.
Press and hold the
POWER button again for at least 3
seconds.
NOTE
The very first time the power is turned on, the volume will start
from level 12.
Inputting an Anti-Theft Code
(Password)
If you have set an Anti-theft code on the page 32, you
must input the password when turning the power ON.
1
Turn on the power to open the panel. The PASSWORD
input screen appears.
2
Press the Preset buttons (0 through 9) to input the
password you have set.
If the password is correct, the opening operation is
performed.
NOTES
•
If you have made an error in the input of the password,
restart from the beginning.
•
If you make errors in the input of the password three times,
the panel is closed.
When the panel is opened again with the OPEN button, the
PASSWORD input screen is displayed, so input the correct
password.
•
If you insert a disc while inputting the password, the unit
will enter the PAUSE mode after you have loaded the disc,
and the disc cannot be played back. The display returns to
the password input screen.
•
If you forget the password, consult the Call Centre or your
nearest Alpine office/Alpine dealer.
Display Angle Adjustment
The movable display may be adjusted to 3 different
angles depending upon user preference.
1
Press the ANGLE
89
button to adjust the angle of the
movable display.
NOTES
•
The display will close shortly after the ignition key is turned
to the OFF position.
•
The adjusted angle of the display is stored in memory. There
is no need to re-adjust the angle when the power is turned
back on.
CAUTION
Keep hands (or any other object) away from the display while
it is opening or closing to avoid damage or injury. The back of
the movable display will get very warm under normal
operating conditions. This is not a malfunction. Do not touch.
MODE
POWER
Rotary encoder
ANGLE 89
Preset buttons
(0 through 9)
Basic Operation
g DN f UP EQ
Movable display