Alpine CDA-7998R, Руководство пользователя

Страница: 21 / 56

19
-EN
PI SEEK Setting
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the f UP or g DN button to select the "PI
SEEK" mode.
3
Press the BAND button to toggle the mode between
"PI SEEK ON" and "PI SEEK OFF."
NOTE
The initial setting at the factory is "PI SEEK ON."
4
Press the SETUP button to set the selected mode.
Receiving Traffic Information
1
Press the T.INFO button repeatedly until the T.INFO
indicator appears in the display.
2
Press the
g
DN or
f
UP button to select your
desired traffic information station. When a traffic
information station is tuned in, the TP indicator lights up.
Traffic information is heard only when it is being
broadcast. If traffic information is not being broadcast,
the unit is set in the standby mode. When a traffic
information broadcast begins, the unit automatically
receives it and the display shows "TRAFFIC
INFORMATION" for a few seconds and returns to the
PS display.
When the traffic information broadcast is over, the unit
will automatically set in the standby mode.
NOTES
•
If the traffic information broadcast signal falls below a
certain level, the unit remains in the receiving mode for 1
minute. If the signal remains below a certain level for over 1
minute, the "T.INFO" indicator blinks.
•
If you do not want to listen to the traffic information being
received, lightly press the T.INFO button to skip that traffic
information message. The T. INFO mode will remain in the
ON position to receive the next traffic information message.
•
If the volume level is changed while receiving traffic
information, the changed volume level will be memorized.
When traffic information is received next time, the volume
level will be automatically adjusted to the level memorized.
•
In the T.INFO mode, the SEEK tuning selects only the TP
stations.
PTY (Programme Type) Tuning
1
Press the F button so that "FUNCTION ON" appears on
the display.
2
Press the PTY button to activate the PTY mode, while
the unit is in Radio (FM receiving) mode.
The Programme Type of the station being currently
received will be displayed for 5 seconds.
•
If there is no receivable PTY broadcast, "NO PTY"
will be displayed for 5 seconds.
•
If no RDS station can be received, the display
shows "NO PTY."
NOTE
If no button is pressed within 5 seconds after pressing the PTY
button, the PTY mode will be automatically cancelled.
3
Press the
g
DN and
f
UP buttons within 5
seconds after activating the PTY mode to choose the
desired programme type while the PTY (programme
type) is being displayed. Each press scrolls the
programme type by one.
4
Press the PTY button within 5 seconds after selecting
the programme type to start searching for a station in
the selected programme type.
The chosen programme type indicator blinks during
searching and lights when a station is found.
If no PTY station is found, "NO PTY" will be displayed
for 5 seconds.
5
Press the F button to activate the normal mode.
"FUNCTION OFF" appears on the display.
NOTE
The FUNCTION mode is cancelled if there is no operation
performed within 5 seconds.
Receiving Traffic Information While
Playing CD or Radio
1
Press the T.INFO button repeatedly until the T.INFO
indicator appears in the display.
2
Press the g DN and f UP buttons to select a
traffic information station if necessary.
•
When a traffic information broadcast starts, the unit
automatically mutes the CD player/changer or the
regular FM broadcast.
•
When the traffic information broadcast finishes, the
unit automatically returns to the original source play
before the traffic information broadcast began.
When traffic information stations cannot be received:
In the tuner mode:
When the TP signal can no longer be received for
over 1 minute, the "T.INFO" indicator blinks.
In the CD mode:
When the TP signal can no longer be received, the
traffic information station of another frequency will be
selected automatically.
NOTE
The receiver is equipped with the EON (Enhanced Other
Networks) function in order to keep track of additional
alternate frequencies to the AF list. The EON indicator
appears while an RDS EON station is being received. If the
station being received does not broadcast the traffic
information, the receiver automatically tunes in the related
station that broadcasts the traffic information when it occurs.
3
Press the T.INFO button to deactivate the Traffic
Information mode.
The T.INFO indicator disappears.
LIGHT M
←
CLASSICS
→
OTHER M