Alpine CDA-7998R, Руководство пользователя

Страница: 34 / 56

32
-EN
Setting an Anti-theft Code
You can guard the operation with a four-digit security
code so that a third party cannot operate this
machine. When you have set an Anti-theft Code, you
must input the password after turning the power
ON. (See Page 6).
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the
g
DN or
f
UP button to select “ANTI-
THEFT”.
3
Press the BAND button to toggle the mode between
OFF and ON.
OFF: You do not use the Anti-theft function. Proceed to
the Step 6 to cancel the SETUP mode.
ON: You use the Anti-theft function. You must input the
password when turning the power ON for the first
time or when resetting. Proceed to the next step
for the way to set a password.
NOTE
The initial setting at the factory is “OFF”.
SETUP Operation
How to set a password
4
Press the g DN or f UP button to select
“PASSWORD”.
5
Press the Preset buttons (0 through 9) when
“PASSWORD” is displayed, and input a four-digit
number.
NOTES
•
Make sure to input a four-digit number for a password.
•
The initial setting of the password at the factory is “0000”.
•
If you should have failed the input of password three times,
the display returns to the ANTI-THEFT ON screen. Press
the
g
DN or
f
UP button to display the PASSWORD
input screen and input the password again.
•
Keep the password you have set in custody, for example, by
taking a note, so that you may not forget it. If you forget
your password, consult the Call Centre or your nearest
Alpine office/ Alpine dealer.
6
Press the SETUP button to return to the normal mode.
NOTES
•
This function protects your machine from a theft, but does
not prevent a theft.
•
Never tell the password you have set and the way to cancel
it to others.
BAND
Preset buttons
(0 through 9) g DN f UP SETUP