9
Electrical Wiring
WARNING: The spa must be wired by a certified electrician in accordance with
local codes and regulations, as well as with these instructions. Failure to do so
will terminate all warranties and invalidate the independent certification
company’s mark.
The Spa has a 15amp power cable provided, which is attached to the spa controller
(behind the front cabinetry). A 15amp socket will need to be fitted by a suitably
qualified electrician.
The power supply must have a suitable RCD, according to national installation
requirements and with suitable trip current. This could be used as the shut-off
switch, which must be installed in plain view of the spa. This electrical service must
be readily accessible to the spa occupants, but must not be within 5 feet of the spa.
After the spa has been positioned, route power cable through the round plastic
knockouts on the left or right front corner of the spa.
Alternatively, the power cable can be put through any side panel or through the
ABS base of the spa by drilling suitable holes
Detailed electrical schematics can be provided on request
