24
NOTE:
If power is interrupted to the system, Time-of-Day is not stored. The system will
still operate and all other user settings will be stored. If filter cycles are required to run at
a particular time of day, resetting the clock will return the filter times to the actual
programmed periods.
When the system starts up, it defaults to 12:00 Noon, so another way to get filter times
back to normal is to start up the spa at noon on any given day. SET TIME will still flash in
the TIME Menu until the time is actually set, but since the spa started at noon, the filter
cycles will run as programmed.
Flip (Invert Display)
Press Up Arrow (Warm) or Down Arrow (Cool) buttons until display is flashing.
Press Light button until Flip appears.
Press Up Arrow (Warm) or Down Arrow (Cool) to toggle time settings hours.
Press Light button to set the minutes.
Restricting Operation and Unlocking
The control can be restricted to prevent unwanted use or temperature adjustments.
Locking the panel prevents the controller from being used, but all automatic functions are
still active.
Locking the Temperature allows Jets and other features to be used, but the Set
Temperature and other programmed settings cannot be adjusted.
Temperature Lock allows access to a reduced selection of menu items.
These include Set Temperature, FLIP, LOCK, UTIL, INFO and FALT LOG.
