AlpicAir ACCMI-26HRDC1A, Руководство пользователя

Страница: 27 / 48

22
5.4 Installation of the Drain Pipe
5 .4.1 Installation of Drain Pipe
Insulating tube
Extension drain piping
(commercially available)
(commercially
available)
drain hose
Indoor unit
Insulating tape
(accessory)
Fig.19
(1). Keep piping as short as possible and slope it downwards at a gradient of at least 1/100 so
tape.
(2). Connect the extension drain pipe to the drain pipe and then tighten the clamp with tape.
rigged piping could lead to leaks and eventually wet furniture and belongings.
corrupt the unit.
(2). It is not allowed to connect the condensate drain pipe into rain pipe to prevent rain water from
(1). It is not allowed to connect the condensate drain pipe into waste pipe or other pipelines which
are likely to produce corrosive or peculiar smell to prevent the smell from entering indoors or
pouring in and cause property loss or personal injury.
5.4.2 Installing the Drain Pipe
(1). Insert the drain pipe to the drain outlet of the unit and then tighten the clamp securely with
Indoor Unit
、
12K
、
18K
A
mm
24K
(3). Condensate drain pipe should be connected into special drain system for air conditioner.
mm
DC Inverter Free match Series Cassette Type Unit
䐟
䐠
䐡
Drain hose
Metal clamp
that air may not remain trapped inside the pipe.
(2). Keep pipe size equal to or greater than that of the connecting pipe.
(3). Install the drain piping as shown and take measures against condensation. Improperly
䐟
䐠
Small sponge
Metal clamp
Large sponge
Insulate the pipe clamp and the drain hose using
heat insulation sponge. During the installation, distance from soft drain
pipe to the gasket is 15±3mm when the bolt is
tightened. It is not allowed to apply PVC or other
related glue in the joints of two ends of drain
pipe.
15