VII. Pumps and fans configuration
To set up these values correctly, you should read the Appendix 3 carefully. First if your pump gives a Tacho
signal, it should already be marked in the property “
Comes with Tacho signal
”. Otherwise you can do it
now. The Property “
Pump connected
” shows the Heatmaster, there is no fan in use and other PWM
values are applied, which should be corrected if needed. The icon of fan/pump on Fan will also be
changed, if you deactivate this function.
Device properties, which are highlighted with star require
hardware restart of microcontrollers, from the file menu.
VIII. Customization of speed pulses
The number of the “
Pulse per rotation
” of pumps with Tachosignal and of some fans must be customized,
so that the correct values are indicated. You can get the required information from the manufacturer’s data
and enter here.
Follow these steps for every Control loop you wish to use. The basic setting of the Heatmaster is
finished with that. Leave the USB cable connected for couple of days to adapt the setups if needed.
You can disconnect the cable thereafter, as the Heatmaster saved all your settings locally in the
device and does not need PC resources any more.
16
