7
7. Climatic RF Boiler Communication
The communication between the remote and the boiler mounted receiver is identified with the symbol.
There are three possible conditions shown via this symbol:
1. Symbol not present - No compatible connection between devices.
2. Symbol flashing - Connection with communication error
3. Symbol permanent - Communication OK
8. Programming
a. Set Time
Turn the mode selection switch to CH/DHW on
.
Press the
button to enter the time setting mode, then press
OK
and the hour will flash.
Using the +/- buttons adjust the time to the correct hour then press
OK
, the minutes will now flash, using the +/- buttons adjust the minutes
then press
OK
. The day of the week will flash, using the +/- buttons set to the correct day of the week and press
OK
then
ESC
to get back to
main menu.
b. Set Heating Programme
Press the
button and TIME will appear, press + and CH PRG will flash, press
OK
and MONDAY will appear.
Using the + button you can programme individual days or blocks of days then press
OK
.
On 1 will be displayed and the time will flash, using the +/- buttons you can select the time you wish the heating to turn on followed by
OK
,
then using the +/- buttons you can set the time you wish the heating to turn off. Press
OK
and the next on period will appear, repeat the
previous procedure for the next on-off periods for the rest of the day to a maximum of four on periods. After one minute the display will return
to main menu or keep pressing
ESC.
NOTE
; if four on / off periods are not required then set the unused periods on off times the same.
E.g. on 23:00 off 23:00.
