12
2. When cutting, simply keep the ruler in contact with edge of stone or the straight edge
while maintaining even cutting pressure to ensure the cuts will be straight.
OPTION A - GUIDE BELOW THE BASE PLATE
When using the edge of the stone as your guide, install the ruler guide down-
ward so that the ruler guide would be below the base plate and the inner
side of the ruler guide would follow the edge of the stone. Measure the
distance from the edge to the indented cut and use this measurement to set
the ruler at the proper distance. (See Figure 9)
OPTION B - GUIDE ABOVE THE BASE PLATE
When using the straight edge as a guide, install the ruler guide upward so
that the ruler guide would be above the base plate and the outer edge of the
ruler guide would follow the edge of the straight edge. Measure the distance
from the straight edge to the intended cut and use it to set the ruler at the
proper distance. (See Figure 10)
Figure-9
Figure-10
