13
Subject to change without notice | 83057000jUK – Translation of the original operating manual | ait-deutschland GmbH
►
Unit
with
cooling:
6. Disconnect the electrical connections:
●
Disconnect 2 white connectors
(①)
at the bot-
tom of the electrical control cabinet. To do this,
release the lugs by pressing on the sides of
the connectors
● Pull out the black rectangular connector
(②)
at
the top of the module box
7. Remove the insulation on the hydraulic connec-
tions.
8. Remove 3 clips on the hydraulic connections.
9. Use spanner size SW 37 to unscrew the heating
flow.
10. Disconnect the hydraulic connections; to do this,
push the pipes apart as far as necessary.
11. Remove the 2 side retaining screws.
