16
Subject to change without notice | 83057100hUK – Translation into English of the original German operating manual | ait-deutschland GmbH
Mount the control on the wall and connect
1.
$<0*0,+0$1B0$40,4$(4,3501$I4)'$1B0$3)-14)*"
2. If visually unattractive: Cut off the lugs on the
rear of the control (are only needed to insert in
the front panel).
3.
$j,45$ 7$ .4/**B)*0+$ R
!
“Dimensioned drawing of
3)-14)*C$G,**T'):-10.$(4,3501M$)-$?,60$7@X"
4.
$SI$ 3,(*0+$ ,40$ I0.$ /-$ I4)'$ :-.04-0,1BU$ K40,5$ ):1$
the web at the bottom in the middle of the wall
(4,3501"$>+0$+/.0T3:1104+$/I$-030++,4&"
5.
A/\$ 1B0$ G,**T'):-10.$ (4,3501L$ R7X$ G/1B$ 7$G,**$
plugs (1) and 2 screws“ (3).
1
2
3
1.
2.
3.
4.
6. Feed in the cables from the wall (e.g. in-wall
box) or from below.
7.
Route the LIN bus cable from the top right-hand
side at the rear from the heat pump and plug into
the control at the bottom.
8.
$8:+B$1B0$3)-14)*$)-1)$1B0$G,**T'):-10.$(4,3501"
9.
8:1$ )-$ 1B0$ ',+5/-6$ ?*,10$ /I$ ,??*/3,(*0$
(accessories).
7
A*:+B/-6C$2**/-6$,-.$D0-1/-6
7.1 Remove the front panel of the
module box
J
Unscrew the front panel of the module box.
7.2 Heating water quality
NOTE
O
For detailed information refer, among
other things, to the VDI Guidelines
2035 “Vermeidung von Schäden in
Warmwasserheizanlagen”
(preventing
damage in hot water heating systems).
O
Required pH value: 8,2 ... 10
O
for aluminium materials: pH value:
8,2 ... 8.5
J
Fill the system with deionised heating water
(VE water / VDI 2035) only (low-salt operation of
the system).
Advantages of low-salt operation:
O
Low corrosion-promoting properties
O
No formation of mineral scale
O
Ideal for closed heating circuits
O
/.0,*$ ?]$ D,*:0$ .:0$ 1)$ +0*IT,*5,*/-/+,1/)-$ ,I104$
2**/-6$1B0$+&+10'
O
SI$ -030++,4&C$ +/'?*0$ ,*5,*/-/+,1/)-$ 1)$ ?]$ D,*:0$
8.2 by adding chemicals
