16
Subject to change without notice | 83059600lUK | ait-deutschland GmbH
12.3 Cleaning and flushing
the condenser
►
Clean and flush the condenser according to the
manufacturer’s instructions.
►
After flushing the condenser with chemical clean-
ing agent: neutralise any residues and flush the
condenser thoroughly with water.
12.4 Annual maintenance
►
Determine the quality of the heating water by
analysis. In the event of deviations from the speci-
fications, take suitable measures without delay.
13 Malfunctions
►
Read out the cause of the malfunction via the diag-
nostic program of the heating and heat pump con-
troller.
►
Consult the local partner of the manufacturer or
the factory’s customer service. Have the fault
message and unit number at hand.
14 Dismantling and disposal
14.1 Dismantling
The unit is disconnected from the power supply
and protected against being switched back on
again.
►
Collect all media safely.
►
Separate components by their materials.
14.2 Disposal and recycling
►
Dispose of environmentally hazardous media ac-
cording to the local regulations (e.g. refrigerant,
compressor oil).
►
Ensure the correct recycling or disposal of unit
components and packaging materials in accord-
ance with the local regulations.
