21
We reserve the right to modify technical specifications without prior notice.
UK830510/191106
© Alpha-InnoTec GmbH
notICe.
a connection to a computer or a network
can be installed via the left bushing on the
bottom of the control element, thus al-
lowing the heating and heat pump regu-
lator to be controlled remotely. one pre-
condition is that a screened network cable
(category 6) be installed through the unit
when installing the unit.
operating manual for the heating and heat pump
regulator, version "qualified technician", “Web
server” section.
If this network cable is available, insert
the network cable's rJ-45 plug into the left
bushing of the control element.
notICe.
the network cable can be exchanged at
any time. In order to be able to connect it,
the screen must first be removed.
Installation and removal of the
screen
installing the sCreen
notICe.
the screen is provided at the time of de-
livery so that the control element may be
inserted in the upper recesses of the front
facade.
If the control element has been inserted in
the lower recesses of the front facade, you
must first remove the screen's temporary
cover and then reinsert it above the logo.
Screen at time of delivery:
1 recess for control element
2 logo
3 temporary cover
first, insert the screen
below
, in the provided slots
on the front of the facade...
