
10
We reserve the right to modify technical specifications without prior notice.
UK830502/190901
© Alpha-InnoTec GmbH
*/45"--"5*0/
Place the unit on a solid, level foundation that is capable
of bearing weight. Make sure that the foundation is de-
signed for the weight of the heat pump. Materials that
meet this requirement can be used for the foundation
(concrete, stone slabs, etc.). The ground surface in the
air outlet area of the heat pump must be permeable to
water.
CAUTION.
In the air outlet area the air temperature
is ca. 5 K below the ambient temperature.
Under certain climatic conditions, there-
fore, an ice layer can form in the air outlet
area.
Install the heat pump so that the air blow-
er does not blow in the direction of foot-
paths.
DANGER!
Several people are required to install the
unit.
NOTICE.:
Always observe the installation plan for
the respective unit model. Note the size
and minimum clearances.
Installation plan for respective unit model.
NOTICE.:
Set up the unit so that the switch cabinet
side (= operating side) is accessible at all
times.
DANGER!
Unit is not fastened to the wooden pallet.
Danger of tipping over during transport!
This can result in personal injury and dam-
age to the unit.
– Take suitable precautionary measures
to eliminate the danger of tipping.
DANGER!
Make sure to secure unit against slipping
during transport.
CAUTION.
Never use components and hydraulic con-
nections on the unit for purposes of trans-
port.
CAUTION.
Do not damage the hydraulic connections
under any circumstances.
CAUTION.
Do not tilt the unit more than a maximum
of 45° (in any direction).