45 / 55
Figure 45 Solar Setting Interface
Step 4:
Set PV capacity, the total
capacity of PV capacity of T10-INV and
PV inverter (if it is installed)
Figure 46 Battery Model Interface
Step 5:
Click the Battery Function and
check battery type M4856-S.
Figure 47 SOC Calibration Interface
Step 6:
Check SOC Calibration function
set No.
Figure 48 CT Meter Option Interface
Step 7:
Choose CT Meter. If you use a
CT, please enter the relevant CT ratio. If
you don’t use CT
, please enter the ratio
as 1.
Figure 49 Grid Setting Interface
Step 8:
Click the Grid Function to set up
relevant parameters about the grid.
Figure 50 Max. Feed in rate Setting
Interface
Step 9:
Set the Max. Feed in rate value.
