23 / 55
Figure 17 Mounting Battery
Step 5:
Insert the expansion tube into the drilled hole. Pass the expansion screw
through the gasket and lock with a screwdriver, as Figure 17 shows.
M4856-S is stackable with maximum of 4 batteries in each row. To install another
battery repeat Steps 1~5.
Figure 18 Unpacking the High-voltage Control Box
Step 6:
Take the HV50056 out of the packaging box. Pull out the top two guide rods
and remove the front panel. Remove the rear bracket from the HV50056, as shown in
Figure 18.
