5
ALMECO nv
Air and water technologies
Royennestraat 51, B-7700 Moeskroen
[email protected] - www.almeco.eu
JETBLACK SAFET Y PERSONNEL CLEANING STATION
4. INSTALLATION
WIRING DIAGRAM
RATING
Please refer to the Cleaning Station rating plate for full details. On wall mounted units, these are located on the side of the ‘On/
Off’ Touch switch. For portable versions, they are located next to the power cable entry.
RAIN COVER
•
Locate fixings suitable for the substrate you are mounting to and secure the Cleaning Station using the four holes in the
baseplate. Ensure the four spacers supplied are fitted under the baseplate when fitting to the wall
•
If the Cleaning Station is already fitted to the wall, remove
and fit spacers supplied under the baseplate, trapping
against the wall upon re-tightening the fixings
•
Unhook the Cleaning Station gun from the holder on the
backplate
•
Lift cover over the Cleaning Station and locate the slots on
the rear face over the spacers fitted underneath
•
It may be necessary to reroute any cable that potentially
fouls on the cover prior to fixing the cover down
•
Secure the cover to the wall with suitable fixings using the
two ø7.0mm holes in the sides
•
Hook the gun onto holder on the cover
