4
ALMECO nv
Air and water technologies
Royennestraat 51, B-7700 Moeskroen
[email protected] - www.almeco.eu
JETBLACK SAFET Y PERSONNEL CLEANING STATION
PORTABLE UNITS
•
The On/Off switch is located behind the carrying handle on the main body. Press ‘I’ to turn the unit On, and ‘O’ to turn off
•
If an anti-static unit has been fitted, a second switch is located on the front of the unit – the switch must be on ‘I’ for the
•
anti-static pack to work correctly
•
Always ensure that the portable Cleaning Station stands level on the four plastic feet provided
•
The Cleaning Station can be fitted with a speed controller, which allows for the speed to be changed
3. YOUR NEW UNIT
PORTABLE UNIT
WALL MOUNTED UNIT
EQUIPMENT ARRIVAL & INSPECTION
If there are any shortages, discrepancies or damage to your product upon delivery of your Cleaning Station, please
immediately contact the Distributor that you purchased it from.
NOZZLE ASSEMBLY DETACHMENT
•
Rotate the black coloured quick release fitting 90 degrees until it clicks
•
Push the upper ring towards the hose (away from the nozzle), pull and twist until it detaches
•
Rotate the black quick release fitting 90 degrees, and back to its original position
•
Push the replacement nozzle into the connector
•
Installation, commissioning and electrical installation should only be performed by a trained service person and in
accordance with the latest IEE regulations
•
Find a suitable location for the Cleaning Station, ensuring the surface can support the total weight including the cover
•
All nominated installers will be responsible for proper and safe installation, as well as for safe operation
PLEASE NOTE: The hose and gun assembly may arrive detached. If this is the case, simply remove the attached bung from the
discharge spigot. Slide the hose clip over the hose cuff, push the hose cuff onto the spigot and tighten the hose clip firmly.
