Almeco ALMEMO V5 5990-2, Руководство по эксплуатации

Страница: 38 / 77

6.6 Configuration of User Menus
When studying the measurement menus you may have noticed that the display
of the measured value and the combination of functions does not always match
your applications in an optimum way. Therefore, the ALMEMO
®
5990-2 allows
you to freely configure three individual user menus, U1 to U3, in addition to the
three standard menus, S1 to S3. You can use the following list of functions to
individually place the functions you require, in any sequence, on your display
up to the available space of 13 lines. In addition to the measuring functions that
have been described before, it is possible to use times and cycles for the
process control (see 7.) and most of the sensor programming functions (s. 9.).
Functions: Display: Keys:
Command:
Limit value Max
(s. 9.5) LimValMax:1234.5°C OFF ON o 00
Limit value Min
LimValMin:-0123.4°C OFF ON o 01
Base value
(s. 9.6)
BaseVal: ------ OFF ON o 02
Factor
Factor: 1.12345 OFF ON o 03
Zero point
(s. 9.7) ZeroPoint: ------- OFF ON o 04
Slope (gain)
Slope(Gain):------- OFF ON o 05
Analog start
(s. 9.10.4)
AnalogStart: 0.0°C OFF ON o 06
Analog end
AnalogEnd: 100.0°C OFF ON o 07
Range
(s. 9.9)
Range: NiCr o 08
Max value
(s. 9.1.3) MaxVal: 1122.3°C CLR CLRA o 09
Min value
MinVal: 19.3°C CLR CLRA o 10
Average value
(s. 6.4) AverageVal: ------- CLR CLRA o 11
Print cycle
(s. 7.2)
PrintCycle:00:00:00nU CLR FORM o 12
Meas. cycle
(s. 7.3)
MeasCycle:00:00:00 S CLR o 13
Time, date
(s. 7.1) 12:34:56 01.02.00 CLR o 14
Meas.value small
(s. 6.4) 00:234.5°CTemperatur
e
ZERO ADJ o 15
Meas. value medium
(s. 6.)
3 lines
00:
1234
.
5
°C
ZERO ADJ
o 16
Meas. value large
(s. 6.)
7 lines
00:
Temperature
°C
1234
.
5
ZERO ADJ
o 17
Meas. value bar
(s. 6.4)
2 lines
(meas. range s. 9.10.4)
5 00
15 0 S220 ms
o 34
38 ALMEMO
®
5990-2
Measuring using the measurement menus