Almeco ALMEMO V5 5990-2, Руководство по эксплуатации

Страница: 36 / 77

6.5 Display of Several Measuring Points
The first three measurement menus allow, on principle, only the selection and
display of one measuring point. This chapter provides a description on how you
can get up to four measuring points with your selection of functions, or even up
to 20 measuring points simultaneously on the display.
6.5.1 Menu Multi Channel Display
After the first call the standard menu ´S3
Multi Channel Display´ indicates the first
three channels of the first connector:
In the user menu U3 ´4 Bar Chart´ four
channels will be displayed with measured
value and bar chart.
Remember to switch on the
continuous measuring point
scan (´C´) to ensure that the
measured values will be
continuously updated.
Measuring point selection :
The 1st measuring channel is always the selected measuring point.
This can be selected directly in any menu, by means of : <
M
▲
>.
To change the other channels, the measuring point
must be selected as function, by means of keys (see above) :
PROG
, <
F
▲
>.
The selected measuring point can now be changed by means of : <
M
▲
>.
The process of measuring point selection is terminated
by pressing key :
ESC
.
In the standard menu S3 only three of the four measuring points are displayed.
This is because of the size of the measured value display and the additional
functions. As described in Section 6.6, this menu can also be configured indi-
vidually by the user as U3 to include other measured value displays and / or
other functions.
With all measured value functions (e.g. maximum, average, and
bar chart), the measured value of the measuring point must always
be entered first and then the associated functions !
The functions ´
Setpoint
´ and ´
Attenuation
´ are available for the
selected measuring point (1st channel) once only.
The functions ´
Set to zero
´ and ´
Adjust
´ cannot be accessed via
this menu.
36 ALMEMO
®
5990-2
Measuring using the measurement menus
C REC COM
|> >|
R01
“
12:34:56 01.02.00
00
:
25
.
45
°C
Ntc Temperature
10
:
54
.
5
%H
% rH Humidity
20
:
-12 . 5
°C
H DT Dew Point
M
▲
PRINT START MANU