ALMAC BiBi 850 HE, Руководство по эксплуатации и обслуживанию

Страница: 36 / 157

35
All MAINTENANCE work must be performed in compliance with the laws in force governing safety
and protection of the environment.
THE MANUFACTURER IS RELIEVED FROM ALL LIABILITY FOR ACCIDENTS OR FAULTS
DUE TO FAILURE TO COMPLY WITH THE RECOMMENDATIONS AND SAFETY
REGULATIONS.
•
Only proceed with maintenance work after you have pressed the emergency push-button and turned
off the engine.
•
Before proceeding with the interventions, make sure the platform is completely blocked.
•
If the basket must be raised for maintenance purposes, the platform and lifting structure must be
prevented from accidentally lowering. To do this, there is a device on the lift arm that must be set
in a precise position so as to immobilize the scissor structure (
see procedure described below ).
•
Protect the environment: avoid spilling oil when changing it or topping up. Used oil
must be disposed of in accordance with the laws in force.
•
Never insert the body, limbs or fingers in sharp, jointed opening on the machine
that is
not controlled or without proper guards unless securely blocked.
•
Do not use petrol, solvents or other flammable liquids as detergents. Always use
authorized non-flammable and non-toxic commercial products
•
Do not use open flames for lighting purposes when performing maintenance.
•
Make sure there are no fluids under pressure before disassembling unions or pipes:
oil spattering out under pressure can cause serious injuries. Immediately call a
physician if injuries occur or the fluid from pipes is accidentally ingested. Remember
that fluid seeping from a very tiny hole can be almost invisible but possess sufficient
force to penetrate under the skin. Use a piece of card or wood to check for leaks.
•
Make sure that all parts of the hydraulic circuit have been tightened correctly
•
When compressed air is used for cleaning parts, protect yourself by wearing safety
goggles with side guards and limit the pressure to 2 atm maximum. (1.9 bar).