25 August 2016
8
LPAssem Version 1.1
•
Wipe off excess glue that may squeeze out when you do the clamping. A slightly damp paper towel
works well here but don’t get the wood too wet.Don’t worry about being perfect here... you can easily
sand off any remaining glue before finishing the neck/body.
•
Let the glue dry with the clamps in place for at least 24 hours. Remove the clamps.
•
Lightly sand any glue squeeze out that remains prior to starting the finishing process.
Figure 18 Neck Clamping
Figure 19 Neck alignment at heel
