LPAssem Version 1.1
15
25 August 2016
sure that the switch is oriented correctly (usually with the “down“ position picking the bridge pickup).
5.10.
Install the Pickups
Electrical connections are starting to come together!
•
Ensure all of the 8 pickup mounting holes in the body are open and clean.
•
Neck Pickup (Figure 37) and Bridge Pickup (Figure 38) differ in the thickness of the mounting rings, as
shown in the pictures. The low side on the mounting rings goes toward the neck.
•
Pass the wires for the neck pickup through the passageway and into the control pocket.
•
Pass the wires for the bridge pickup through the passageway and into the control pocket
Figure 32 Wire Fed into
switch cavity...
Figure 33 ...into the neck
pickup cavity
Figure 34 ... and feeding
through toward the bridge
pickup...
Figure 35 and through bridge
pickup cavity to control
Figure 36 Switch poking
through
