Allo.com Nano 2, Руководство пользователя

Страница: 41 / 55

NANO 2 – Additional Features
User Manual v2.7
www.allo.com 36
Allow RTP Reinvite If enabled, the Nano2PBX will try to redirect the RTP media stream
(audio) to go directly from the caller to the callee. The default setting is
"No NAT".
• Yes
• No NAT: Allow media path redirection (Reinvite) but only when the
peer is not be behind NAT. The RTP core can detect if the peer is
behind NAT or not based on the IP address where the media comes
from.
• Update: Use UPDATE for media path redirection, instead of INVITE.
Note: Some devices do not support this (especially if one of them is
behind NAT).
5.4.4.1. Misc
Navigation: General Settings > SIP settings > Misc: This is where you can configure the
miscellaneous sip settings.
The details to be filled are given as:
FAX Settings
FAX Format Select the FAX format either in TIFF or PDF
T.38 fax (UDPTL) Enables T.38 Fax Pass-through Mode.
Fax Email ID Assign the Email Address to which the FAX attachment has to be sent
Out Bound SIP Registration Settings
Register Register as a SIP user agent to a SIP proxy (provider)
Register Time-Out
Configure the register retry timeout (in seconds). The default setting is
20.
Register Attempts Configure the number of registration attempts before the Nano2PBX
gives up. The default setting is 0, which means the Nano2PBX will
keep trying until the server side accepts the registration request.