Allo.com Nano 2, Руководство пользователя

Страница: 18 / 55

NANO 2 – Setting up Features
User Manual v2.7
www.allo.com 13
4.4. Outgoing Calling Rule
4.4.1. New Calling Rules
Navigation: Setup > Outgoing Calling Rules > New Calling Rule : This is where you
configure Dial out Rules.
Outgoing Calling Rules represent the prefix sequence used to dial when making an outgoing
call either through PSTN (Analog) or VoIP. There are two ways to make outgoing calls for
the registered extension users:
•
VoIP / SIP trunk via ITSP gateway
•
LINE / PSTN trunk via FXO port
Calling Rule Name Configure the name of the calling rule (e.g., local, long-distance, and
etc). Letters, digits, _ and - are allowed.
Pattern
• All patterns are prefixed with the "_".
Pattern All patterns are prefixed with the "_".
• Special characters:
X: Any Digit from 0-9.
Z: Any Digit from 1-9.
[12345-9]: Any digit from 1 to 9.
N: Any Digit from 2-9.
".": Wildcard. Match one or more characters.
"!": Wildcard. Match zero or more characters immediately.
Caller ID Name Configure the CallerID Name associated with the FXO trunk
You can even use the Calling rule to route it to local extensions as Destination or Route the
calls to Trunks created so as to make the calls successful. There as still many options like
striping the number of digits from front, prepend the digits before dialing and filter. There is
also another alternative way if the trunk fails to route the call i.e. Failover Trunk an
alternative trunk to route calls.
Send this call through trunk
Use Trunk Select the trunk for this outbound rule.(FXO/VOIP Trunk)
Strip Allows the user to specify the number of digits that will be
stripped from the beginning of the dialed string before the call
is placed via the selected trunk.