Allnet ALL0199AP, Руководство пользователя

Страница: 27 / 32

50
Chapter 6. Default Settings
B-1 Basic Configuration
B-1-1 System (as shown in Table B-1)
Parameter Description Default Value
Supervisor ID Supervisor’s identity code root
Supervisor Password Supervisor’s password root
Password Confirm Confirm the password again root
Host Name Host name for the AP HWLAN
Domain Name Domain name for the AP domain.com
Default Route IP
Address
IP address of the gateway for
default route when TCP/IP
filtering
192.168.2.254
DNS Server Parameter
DNS Server 1 Address
DNS Server 2 Address
DNS Server 3 Address
IP addresses of the DNS
Servers of your Local ISP
192.168.2.254
Table B-1
B-1-2 Interface (as shown in Table B-2)
Parameter Description Default Value
Interface No.
No.1 Wireless Interface
No.2 Ethernet Interface
No.3 PPPoE Interface
No.4 PPP Interface
Note:
1. No.3 is effective
only when No.2 is
Active.
2. Default No.3 &
No. 4 is Disable
Status
Enable or disable the
Corresponding interface
Active
IP address
IP address of the corresponding
interface. The user can use a
LAN attached (wired or wireless)
computer to configure the AP
through using a web browser
No.1: 192.168.1.1
No.2: 192.168.2.1
No.3: 192.168.3.1
No.4: 192.168.4.1
51
or telnet program on a LAN
attached computer.
Net Mask
Consists of four sets of digits
that help divide a network into
sub-networks and simplify
routing and data transmission
No.1:255.255.255.0
No.2:255.255.255.0
No.3:255.255.255.0
No.4:255.255.255.0
NAT(PAT)
Select the network type for NAT
function.
OFF <-> ON: NAT enable
ON <-> ON: NAT disable
OFF <-> OFF: NAT disable
No.1: OFF
No.2: OFF
No.3: ON
No.4: OFF
Bridging
Shows the corresponding
interface that joins to form a
bridge
No.1: Not Join
No.2: Not Join
No.3: Not Join
No.4: Not Join
ISP Index
Select the ISP index given in
the ISP pool
ISP1
IPCP
Select IP Control Protocol
(Static or dynamic) for
PPP/PPPoE interface
Dynamic
Idle Time Out (min)
Cancel the dial if not connected
within this period
3min
Dial Priority
Set the dial-up priority of the
corresponding interface
PPPoE: 3
PPP: 2
Dial-in
Enable or disable the dial-in
function of the corresponding
interface
Disable
Dial-in Authentication
Selects the authentication
protocol for the corresponding
dial-in interface
None
Table B-2