Allnet ALL0199AP, Руководство пользователя

Страница: 15 / 32

26
5. Click FINISH at the bottom of this page to complete the modification of
this page.
3.4.5 MAC based Access Control
1. Click
Basic Config , select MAC Filter page , and choice the MAC Filter
services is Enable or Disable (as shown in Figure 3-13 ).
2. You can specify the MAC address of a wireless client station. All MAC
entries in the MAC address table are permitted to connect to the AP.
You can also click
ADD , DELETE , MODIFY button to maintain this
MAC address table. After that, click FINISH at the bottom of this page
to complete the modification of this page.
Figure 3-13
27
3.5 Configure DHCP server
Sometimes, the operator want to managing a large TCP/IP network
requires maintaining accurate and up-to-date IP address and domain name
information. In this situation, it needs manually configure and enable the
DHCP server service.
1. Click Basic Config , select DHCP (as shown in Figure 3-10 ) and
Enable the DHCP server service (Default is Disable ).
2. Specify the DHCP server parameters ( Assign Gateway , Assign
Subnet Mask , Assign DNS server , DHCP Start IP address , DHCP
End IP address and Apply Interface ) to allow any DHCP client to
acquire the IP information.
Assign Gateway : Configure the default router for the client.
Assign Subnet Mask : Configure the subnet for the client.
Assign DNS Server : Configure the DNS servers IP for the client.
DHCP Start IP address, DHCP End IP address : Configure the DHCP
IP address pool for the client.
Apply Interface : Enable DHCP server service on Wireless or Ethernet
interface.
3. After that, click FINISH at the bottom of this page to complete the
modification of this page.
Hint: The operator must to configure correct network settings in
Gateway and DNS server of your wireless stations / Ethernet clients to
surf the Internet.