18
Hint1: Make sure interface 4 within status
Disable
.
Hint2: Choice the
NAT (PAT)
in every interfaces to enable NAT
service. For example, make sure PPPoE interface within
NAT
(PAT)
On
and others are
Off
, it means that every
communications through the PPPoE interface needs NAT
transfer.
4. The AP supports PPPoE auto dial-up, please make sure your
default
route
is zero. In here, click
Basic Config
, and then select
System
as
shown in
Figure 3-9
. In the
System Setup
page, specify the
Default
Route
(
Default is 192.168.2.254
) is
0.0.0.0
and then click
FINISH
button at the bottom of this page to complete the modification of this
page.
Figure 3-9
5. Click
Basic Config
,
select
DHCP
(as shown in
Figure 3-10
)
and make
sure the DHCP client service is in
Disable
. After that, click
FINISH
at
the bottom of this page to complete the modification of this page.
19
Figure 3-10
Содержание ALL0199AP
Страница 26: ...48 Weight 2100 g 49 ...
