Allmatic BIOS1 24V, Руководство пользователя

Страница: 23 / 120

3/20 6-1622400 rev. 8 19/01/2022
ENG
ITA ENG FRA ESP NLD TUR
3 - PRODUCT DESCRIPTION
The control unit BIOS1 24V is suitable for the installations of 1 motor with direct current 24V and a maximum absorption of 10A . This device has an
easy and intuitive functioning thanks to the display interface and 4 buttons. The control unit allows a precise regulation of all parameters. The control
unit can memorize up to 1000 transmitters (external memory) with the step by step, partial opening, open and close functions. It is supplied with inputs
for opening and closing photocells, safety edge (mechanical or resistive), opening/closing limit switches and buttons for step by step, partial opening,
open, close and stop. The outputs include a 24 Vac flashing light, 24Vac courtesy light/open automation light and 24 Vdc accessories power supply.
Buffer batteries use is available in case it would be necessary to assure the temporary service in case of lack of power.
1. Fuse 1: T 10A fuse for motor protection.
2. Connection for motor power supply.
3. Connection for transformer.
4. Fuse 3: T 2,5A fuse for 24Vac outputs protection.
5. Connection for flashing light
6. Connection for courtesy light / open automation light.
7. Connection for photocells power supply and 24Vdc accessories.
8. DIP-SWITCH for safety devices
9. Connection for command and safety devices.
10. Signaling Led for the inputs state.
11. Connector for optional R1 card.
12. Signaling Led for the radio signal.
13. Connector for external memory.
14. Connector for Bluetooth module.
15. Connector for radio module.
16. Button DOWN -.
17. Button MENU.
18. Button UP +.
19. Button Step-by-Step (SS).
20. Connection for antenna.
21. Display.
22. Led for the presence of the power supply.
23. Fuse 2: F200mA fuse for 24Vdc protection.
24. Connection for the batteries charger card.
3.1 - MAIN COMPONENTS / CONNECTIONS
RELAY 1
RELAY 2
RELA
Y 5
RELAY 3
RELAY 4
FUSE 3
FUSE 1
FUSE 2
DISPLAY
EDGE STOP PH1 PH2 OPEN CLOSE PED SS COM LS1 LS2 OGL
+24VDC
GND
+24VDC
TX PHOTO
1-2: FLASH
MO
TOR
BA
TTER
Y CHARGER
POWER
ON
UP DOWN
MENU
SS
1 2 3 4 5 6 7
RADIO
21
22
23
24
25
26
J5
J7
J4
J3
J2
RAD1
+
-
ON DIP-SWITCH
EDGE PH2 PH1 STOP
9 10 11 12 13 14 15 16 17 18 19 20 8
PE
3
2
5
1
4
6 7 8 9
15
10
14
13
11
12
19
17
18
16
21 20 22
23 24
FIG. 1