Allmatic AX100 24V, Руководство пользователя

Страница: 9 / 22

ITA ENG FRA ESP DEU POR 6-1624028 rev.6 05/07/2013 9 / 22
ENG
Preliminary checks and fixing the gear motor
•
Check that the gate structure is sufficiently sturdy and there are no points of fricon.
•
Make sure the gate hinges are working properly and the adequately lubricated.
•
Check there are mechanical stops in closing and opening.
•
Prepare for fixing the gear motor to the gate as illustrated in figure 1.
OPENING ANGLE “C”
B \ A 80 100 120 140 160 180 200 220 240 260
100 90 100 110 115 120 105 100 95 90 90
120 90 100 110 110 110 100 95 90
140 100 105 105 100 95 90
160 95 100 100 90
180 95 95
200 95
FRONT BRACKET POSITION “D”
B \ A 80 100 120 140 160 180 200 220 240 260
100 730 745 765 780 795 770 755 735 710 700
120 750 765 785 790 795 775 755 735
140 785 795 800 795 775 755
160 800 805 810 785
180 820 820
200 840
FIGURE 1
O
P
E
N
IN
G
A
N
G
LE
C
E
COMPLET EXTENSION “E”
B \ A 80 100 120 140 160 180 200 220 240 260
100 810 846 885 920 956 951 956 956 951 961
120 832 867 907 932 957 957 957 957
140 888 918 943 958 958 958
160 905 930 955 950
180 927 947
200 950
Closing
mechanical stop
Opening
mechanical stop
Attention: For a correct functioning of the
system, it is absolutely indispensable the
use of mechanical stops in opening and
closing,
without using the maximum
extension of the gearmotor like mechanical
stop. Not using mechanical stops may result
in a premature failure of the engine.