Allmand Maxi-Power MP65-8B1, Руководство оператора

Страница: 6 / 55

5
WARNING
• Contact with the output terminals and control board
could cause electric shock, resulting in death or
serious injury. Do not open the cover of the output
terminal board during machine operation.
• When removing or connecting a connecting cable
for changing load, be sure to switch OFF the circuit
breaker, remove the starter key from the starter
switch, then perform work.
WARNING Contact with rotating parts or
belts could cause death or serious injury. Keep hands
from rotating parts and belts while machine is in
operation.
WARNING Do not open radiator
cap during or immediately after operation. Explosive
pressure of hot liquid could cause severe burns,
resulting in death or serious injury.
WARNING Do not touch hot parts.
• Never work nearby hot portions of the machine while
it is running.
• Parts such as engine, exhaust manifold, exhaust
pipe, muffler and radiator are especially hot. Never
touch these parts, as it could result in serious burns.
• Coolant water and engine oil are also very hot and
dangerous to touch. Do not check or add while
machine is running.
WARNING Fire prevention.
• Fuel and oils are extremely flammable. Do not bring
ignition sorces near machine when checking or
adding fuel and oils.
• Adding fuel and oils should be done outdoors or in a
well-ventilated location.
• Refuel after stopping engine, and never leave
fuel near machine. Do not spill. If spilled, wipe up
completely.
• Do not fill fuel oil up to cap level. Fuel oil will overflow
due to volume expansion caused by rise of ambient
temperature. Fuel can also spill during machine
movement or transporting.
• Parts such as muffler and exhaust pipe can be
extremely hot. Remove twigs, dried leaves, dried
grass, waste paper, etc. from around muffler and
exhaust pipe.
• Keep a fire extinguisher available by machine in case
of fire.
WARNING Hang a “Now Checking and under
Maintenance” tag:
• Remove starter key from starter switch before
starting inspection, and hang up a “Now Checking
and under Maintenance” tag where it can be easily
seen. Inspector must keep key during checking and
maintenance.
• Remove black negative (–) cable from battery.
• Neglecting above procedure could result in death or
serious injury.
WARNING Adjusting belt tension:
• Attempting to adjust belt tension with machine
running could result in death or serious injury.
• Stop engine, remove starter key, and remove black
negative (-) cable from battery before adjusting belt
tension.
WARNING Hands off cooling fan:
• Contact with cooling fan while machine is running
could result in death or serious injury.
• Stop engine and remove starter key whenever
maintenance is to be performed near cooling fan.
WARNING Wear safety glasses when
cleaning dust accumulated in such devices as air-filter
by blowing compressed air.
WARNING Lighting apparatus:
• If work site is dark, use lighting to illuminate work
area. Working without illumination could result in
death or serious injury.
• Work lighting should be fitted with safety guard to
protect against breakage.
• Do not allow work light to contact fuel or oils, as they
could ignite, causing death or serious injury.
WARNING Opening coolant water drain
valve cap:
• Stop engine and let coolant water sufficiently cool
down before draining.
• If drain valve is opened before coolant water is
cooled enough, hot water could jet out, resulting in
death or serious injury.
CAUTION Refilling or draining engine oil:
• Engine oil is extremely hot during and just after
operation.
• Stop engine and wait 10 to 20 minutes before
checking, adding or draining engine oil.
CAUTION Treatment of organic wastes.
• Waste liquid from machine contains harmful
material. Do not discharge onto ground or into rivers,
lakes or sea. Such material will contaminate the
environment.
• Be sure to use an approved container to hold waste
liquid from machine.
• Be sure to follow local, state or federal regulations
when disposing of oil, fuel, coolant (antifreeze), filter,
battery or other harmful materials.
Go
to
Discount-Equipment.com
to
order
your
parts