Allmand Maxi-Power MP65-8B1, Руководство оператора

Страница: 34 / 55

33
Check Vibration Isolators
The vibration isolators ( F ) are used for the support
of generator and engine. Check for any damage or
deterioration due to oil sticking. If any is found, contact
your authorized dealer.
F
Change Coolant
WARNING
• Be sure to stop the machine and allow time to cool.
Then loosen the radiator cap one notch. After the
coolant water is sufficiently cooled and the inner
pressure is released, take the cap off.
If this procedure is neglected, the inner pressure
can blow off the cap. Steam jetting out of the
radiator could result in causing scalding. Follow this
procedure under all circumstances.
• LLC (Antifreeze) is a toxic material.
If swallowed, seek immediate medical attention. Do
not induce vomiting.
If in eyes, wash eyes with clean running water and
seek immediate medical attention.
When storing, store in an approved container,
clearly labeled ‘LLC (Antifreeze) inside’, away from
children.
• Keep away from fire and flame.
1. To drain coolant, remove radiator cap (
G ), and
loosen radiator drain valve ( H ). Also open drain
valve on engine cylinder block ( I ). Be sure to drain
coolant into an approved container.
2. After draining, close drain valves, then supply
coolant through filler port ( J ). (Coolant capacity: see
Specifications .)
3. After filling with coolant, run machine in unloaded
condition for approximately 2 to 3 minutes. Stop
machine and check coolant level. Add as needed.
4. Dispose of used coolant according to local, state
and/or federal regulations.
I
H
J
G
Go
to
Discount-Equipment.com
to
order
your
parts