Allmand Maxi-Power MP25 T4F, Руководство оператора

Страница: 55 / 68

Not for
Reproduction
55
6. Storage and Disposal
6-1
6.1 Preparation for Long-term Storage
When the machine is left unused or not operated longer than half a year (6 months), store it in a dry place
free of dust after the following treatments have been done to it.

Put the machine in an enclosure if it is stored outside. Avoid leaving the machine outside with a sheet
cover directly on the paint for a long period of time, or this will cause rust to the machine.

Perform the following treatments at least once every three months.
<Procedure>
1. Discharge existing lubricant from the engine oil pan. Pour new lubricant in the engine to clean the
internals of the engine. After running it for a while, drain it again.
2. Spread lubricant on each moving part.
3. Completely charge the battery and disconnect grounding wires. Remove the battery from the machine,
if possible, and store it in a dry place. (Charge the battery at least once every month.)
4. Discharge coolant and fuel from the machine.
5. Seal air-intake port of engine and other openings like the muffler with a vinyl sheet, packing tape, etc., to
prevent moisture and dust from getting in the machine.
6. Measure the insulation resistance of the generator, and make sure that it is more than 1M Ohms. (See
5.4.8)
7. Be sure to repair any trouble and maintain the machine so that it will be ready for the next operation.
6.2 Disposal of Product

When disposing of this machine, first drain the cooling water and oils. If you require any additional
instruction or advice, contact your nearest dealer.
6 Storage