Not for
Reproduction
33
3. Operation
3-20
3.5.5 Fuel line air bleeding device
If the machine runs out of fuel, bleed the air, according to the following procedures.
A180114E
A180824
<Procedure>
1. Refill the fuel.
2. Set the control power switch [A] to [ON] position.
3. Press the manual mode button [B] to activate the electromagnetic
pump.
4. Loosen the
air bleeding plug
[D] of the fuel filter element [C] and
loosen the priming pump [E], push the priming pump back and
forth until fuel comes out (more than 20 times).
5. After air
bleeding
is completed, tighten the
air bleeding plug
and
push the priming pump back and forth until the fuel filter element is
filled with fuel (more than10 times).
6. Wait about 1 minute, and then loosen the
air bleeding plug
to
bleed air from the fuel filter element.
7. Repeat steps 4 to 6 until the air does not come out of the
air
bleeding plug
.
8. Finally, firmly tighten the
air bleeding plug
and priming pump
to wipe the surrounding fuel clean.
A B
D
E
C
Содержание Maxi-Power MP25 T4F
