manualshive.com logo in svg

Allied Guppy, Техническое руководство, Страница: 71 / 238

Поделиться
Скачать
Allied Guppy Скачать руководство пользователя страница 71

Description of the data path

 GUPPY Technical Manual

 

V4.0.1

71

White balance

The color cameras have both manual and automatic white balance. White bal-
ance is applied so that non-colored image parts are displayed non-colored.

White balance does not use the so-called PxGA® (Pixel Gain Amplifier) of the 
analog front end (AFE) but a digital representation in the FPGA in order to 
modify the gain of the two channels with lower output by +9.5 dB (in 512 
steps) relative to the channel with highest output.

The following screenshot is taken from the datasheet of the AFE and illus-
trates the details:

The analog color signal, coming in pulse amplitude modulation from the sen-
sor, is in the form of the BAYER™ color pattern sequence. It is initially pro-
cessed in the CDS (correlated double sampler) then bypasses the PxGA before 
further amplification and digitization.

 Figure 32: Block diagram of AFE (Source: Analog Devices)

Содержание Guppy















































































































































































































































Отзывы:

Нет отзывов