manualshive.com logo in svg

Allied Guppy, Техническое руководство, Страница: 111 / 238

Поделиться
Скачать
Allied Guppy Скачать руководство пользователя страница 111

Camera interfaces

 GUPPY Technical Manual

 

V4.0.1

111

Outputs

The standard Guppy camera has 3 inverting outputs.

Output features are configured by software. Any signal can be placed on any 
output.

The main features of output signals are described below:

Note

L

•

This feature works with external Trigger_Mode_0 only.

Outputs

Operating Conditions

Output voltage

0 ... 5.5 V

Output current

Max. 

±

 20 mA

 Table 44: Output characteristics

Signal

Description

IntEna (Integration Enable) signal

This signal displays the time in which exposure 
was made. By using a register this output can be 
delayed up to 1.05 seconds.

Fval (Frame valid) signal

This feature signals readout from the sensor. This 
signal Fval follows IntEna.

Busy signal

This signal appears when:

•

the exposure is being made or

•

the sensor is being read out or

•

data transmission is active.

 Table 45: Output signals

Содержание Guppy















































































































































































































































Отзывы:

Нет отзывов